Professional Equipment     Print Page
PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187


Fluke-FP FoodPro Food Safety Thermometer

 Fluke-FP FoodPro Food Safety Thermometer
Item #: T609-7945
Manufacturer: Fluke Corporation
Manufacturer Item #: Fluke-FP
Product Type: Food Safety
Your Price: $99.95
 In Stock
Get safe, easy, and fast non-contact surface temperature readings with the Fluke-FP FoodPro Food Safety Thermometer
Features & Applications:

Professionals depend on the Fluke FoodPro Thermometer when working with dangerous temperatures. Instantly take non-contact temperatures with the HACCP scanner, and rely on the "safe" and "unsafe" readings with green or red HACCP Check lights. This easy-to-use food thermometer is a complete temperature measurement and monitoring solution for foodservice workers.

Using an infrared measurement technique, the highly accurate FoodPro quickly reads surface temperatures, allowing workers to make rapid and frequent temperature measurements – faster than contact units and without fear of cross contamination. The unit's illumination light allows easy viewing of the measurement area.

Features:

  • Take safe, easy, and fast non-contact temperature readings without the risk of cross-contamination
  • HACCP check lights instantly recognize safe or unsafe temperatures
  • Ensures highly precise targeting via LED target illumination of the entire measurement area
  • NSF certified and hand washable (non-submersible)
  • Display hold

Spec Summary:

Infrared Temperature Range:
 -20 to 401°F (-30 to 205°C)
Infrared Response Time:
 500 ms after initial reading
Infrared Distance to Spot Size /
Optical Resolution (D:S):
 2.5:1 @ 90% energy, typical
Typical Working Range (Target Illumination):
 ≈1” to 10” (≈25 mm to 250 mm)
Infrared Minimum Target Size:
 0.5” (12 mm) Ø
Target Illumination:
 High Brightness LED
Temperature Display:
 4 digits, 0.5°F resolution (0.2°C)
Environmental:
 IP54 sealing (hand-washable, non-submersible)
Standards:
 Conforms to EN 61236-1 Electromagnetic Emissions
and Susceptibility, EN 6101-1 General Safety, Sealing
IP65 (hand washable, non-submersible)
Certifications:
 CE, NSF
Warranty:
 2 years
Measurement Accuracy:
Between 32 to 150°F (0 and 65°C): ±2°ºF (±1°C)
Below 32°F (0°C): ±2°F (±1°C) ±0.1 degree/degree
Above 150°F (65°C): ±1.5% of reading
[Assumes ambient operating temperature of 73°F ±4°F
( 23°C ±2°)]
Close Window