Professional Equipment     Print Page
PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187


Relative Humidity - Temperature - Carbon Dioxide Datalogger Kit

 Relative Humidity - Temperature - Carbon Dioxide Datalogger Kit
Item #: M500
Manufacturer: Telaire
Manufacturer Item #: 7001D
Product Type: Temperature Data Loggers
Your Price: $629.95
 In Stock
Record and log relative humidity, temperature & CO2 readings and graph data on your PC
Features & Applications:

Poor air quality cannot only affect ambient air, but result in decay or damage to a structure. Equipped with infrared technology to accurately measure these components. Measure RH, temperature and CO2 with precision-enabling you to assess the conditions in the test area.

Designed for residential and commercial applications, it also has the ability to calculate and display cfm/person ventilation rate-hence identifying ventilation-related problems such as moisture build-up, combustion gas build-up, etc. Record your findings on your computer utilizing the included graphical software and cable.

Features:
  • Dual beam absorption infrared
  • Display: LCD
  • Sample method: diffusion or flow through (50 – 100 ml/min)
  • Power supply: 4 AA batteries (not included) or 6V DC from external AC/DC adapter (included)
  • Includes graphing software & computer cable
Applications:
  • Commercial
  • Residential

Procedure for using the Hobo datalogger:

  • Connect the 7001 to channel 3 or 4
  • Connect the datalogger to the computer
  • Start the Hobo Boxcar software
  • Click on the 'Launch' button to connect to the datalogger
  • When the Launch screen appears, click on the 'Enable/Disable Channels' button
  • Select the appropriate channel (3 or 4) that the 7001 is connected to
  • On the pull down menu next to the appropriate channel, select 'Voltage (Cable 2.5 Stereo)'
  • Click on the 'Apply' button

    • Spec Summary:

    Temperature (internal sensor)

    Range:

    		-4 to +158°F (-20 to +70°C)
    Range for internal sensor when used outside of case:
    -40 to +248°F (-40 to +120°C)

    Accuracy:

    		±1.27°F (±0.7°C) at +70°F

    Resolution:

    		 0.7°F (0.4°C) at +70°F

    Response time still in air:

    		 15 min. typical with sensor inside case;
    1 min. typical with sensor outside case
    Relative humidity (user-replaceable RH sensor)

    Range:

    		 25 to 95% RH at +80°F for intervals of > 10 seconds,
    non-condensing and non-fogging

    Accuracy:

    		 ±5%

    Response time:

    		10 min. typical in air

    Sensor operating environment:

    		+41 to +122°F (+5 to +50°C)
    non-condensing and non-fogging
    Power:
    External input accepts the following sensors:
    Wide range of temp sensors (TMCx-Hx series)
    Split-core CTs for AC current (5 Models)
    4-20 mA input cable (CABLE-4-20mA)
    0-2.5 V DC input cable (Cable-2.5-Stereo)

    Input range:

    		 0 to +2.5 Volts DC

    Resolution:

    		 10 mV (8-bit)
    External 2.5 Volt input
         2.5 mm jack: external input ground, input, switched 2.5 Volt
    output; external input ground connection is not the same
    as PC interface connection ground and should not be
    connected to any external ground

    Accuracy:

    		±10 mV ±1% of reading

    Out power:

    		 +2.5 Volts DC at 2 mA, active only during measurements
    Performance
    CO2 Channel

    Measurement Range:

    		 0-4,000 PPM voltage output
    0-10,000 PPM display

    Resolution:

    		 ±1 ppm

    Accuracy:

    		 ±50 ppm or ±5% of reading (up to 1.5% or 15,000 ppm),
    whichever is greater

    Warm-Up Time:

    		 <60 seconds at 72°F

    Operating Conditions:

    		 32-122°F
    0-95% RH, non-condensing

    Storage Temperatures:

    		 -40 to 140°F

    Calibration Interval:

    		 12 months, offset adjustment using single gas at 0-1000 ppm CO2.

    Close Window