The economical M40 Confined Space Equipment Kit is the ideal meter for LEL, O2, and CO detection!
Features & Applications:
The M40 Confined Space Equipment Kit is a reliable, low cost gas monitoring solution for confined space or personal monitoring applications. The M40’s rugged composite case is immune to RFI, and houses three discrete sensors, a large LCD readout, and integral lithium-ion battery for up to 18 hours continuous runtime.
This Confined Space Equipment Kit M40 continuously monitors oxygen, combustible gases, and carbon monoxide in any combination, activating bright alarm light. Compliance: UL and CSA approved.
Features:
- Compact, light, rugged ABS case
- 18-hour runtime with integral Li-ion battery pack
- Low, High, STEL, and TWA user adjustable alarms
- •Standard 50-hour datalogging
- Quick calibration
- Graphical LCD
- Two-year all-inclusive warranty
- Standard vibrating, 90 dB audible and LED alarms
- Gas monitoring for O2, LEL, CO
- Kit includes:
- Monitor with motorized sampling pump
- Compact charger
- Combo monitor/pump nylon carrying case
- Cell-phone belt clip
- Calibration cup with tubing and sensors
- Maintenance tool
- Gas cylinder
- Regulator valve
- Water barrier assembly and filter
Spec Summary:
Case: |
High-visibility, impact resistant composite – RFI, EMI & IP65 approved |
Dimensions: |
4.30" x 2.45" x 1.37" (109 mm x 62 mm x 35 mm) |
Weight: |
8.6 ounces (244 g); 11.6 oz (326 g) with SP40 attached |
Sensors: |
Combustible Gases/Methane - Catalytic Diffusion
Oxygen and Toxic Gases - Electrochemical |
Measuring Ranges: |
LEL - 0-100% LEL in 1% increments
CO - 0-999 ppm in 1 PPM increments
O2 - 0-30% of volume in .1% increments |
Display: |
Custom graphic LCD with backlight |
Power Source (Run time): |
Standard Li-Ion Battery pack that does not need to be removed for charging
(18 hour runtime; 12 hour runtime with SP40 pump attached) |
Temperature Range: |
-4 to 122ºF (-20 to 50ºC) |
Humidity Range: |
15 to 95% RH, typical
0 to 99% RH intermittent (non-condensing) |
Approvals: |
UL and CSA – Class I, Div. I, Groups A, B, C, D; T4
ATEX – EEx ia d IIC T4
Australia – Ex ia s Zone 0 IIC T4 |
Note: Industrial Scientific products can only be sold in North America only.
|
