This BW Gas Alert Confined Space Kit will keep you and your workers safe from harmful gases in confined spaces.
Features & Applications:
The BW Gas Alert Confined Space Kit's multiple alarm levels include: instant low and high alarm for all gases, TWA (time weighted average), and STEL (short term exposure limit) for H2S, CO, and OL (over limit) alarm. This rugged, ultra-compact, and lightweight monitor features easy-to-use, one-button operation/calibration and integral concussion-proof boot for demanding environments. The unit datalogs up to 16 hours and 10 events.
The continuous LCD on this BW Gas Alert Micro Clip shows simultaneous gas concentrations for H2S and CO. It's powered by a lithium polymer battery with an approximate 12-hour run-time, and it recharges in less than three hours! Alarms include: 95 dB typical alarm tone, bright wide-angled alarm bars, and an internal vibrating alarm for high noise areas. Additional features include full-function self-test of sensor, battery, circuitry, and audible/visual/vibration alarms.
Features:
- Rugged, ultra-compact (4.2 x 2.4 x 1.1 in / 10.7 x 6.0 x 2.7 cm) and lightweight (5.6 oz. / 160 g)
- Simple one-button operation
- Standard datalogger (16 hours) and event logger (10 events)
- Durable stainless steel alligator clip
- Integral concussion-proof boot for the most rugged environments
- Continuous LCD shows simultaneous gas concentrations for H2S, and CO
- Powered by a lithium polymer battery (run-time typically 12 hours; recharges in less than 3 hours)
- Provides 95 dB alarm tone (typical) and bright wide-angled alarm bars
- Equipped with internal vibrating alarm for high noise areas
- Backlight: in alarm (auto) and on demand reactivation
- Four alarm levels: Instant Low and High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
- Simple one-button automatic calibration procedure
- Records TWA, STEL and maximum exposures to gas and displays readings on command
- User selectable options include: confidence beep, latching alarm, calibration due date, bump due date, “SAFE” display function, multi-language, span concentration values, and stealth mode
- Full function self-test of sensor, battery, circuitry and audible/visual/vibration alarms
- Delivered ready for use with sensors, lithium polymer battery, stainless steel alligator belt clip, calibration hose/cap and instructions
- Confined Space Kit also includes:
- IR Connectivity Kit
- Hard-sided foam-lined carrying case
- Sampling equipment
- Hand aspirator pump
Spec Summary:
DETECTOR: |
2-gas detector |
Auto zero: |
Yes |
Calibration: |
Automatic |
Backlight: |
Alarm condition (auto) and reactivation on demand |
Sensor: |
Plug-in, electrochemical cell (toxic); plug-in, catalytic bead (LEL) |
User options: |
Adjustable STEL period (5 to 15 minutes in 1 minute intervals); set calibration span
levels and due date; toggle ON/OFF;
auto-zero CO and H2S on start-up; latching alarms; “SAFE” display function
(does not display gas concentrations unless detector goes into alarm);
stealth mode for silent operations; force calibration when calibration overdue;
calibration lockout (calibration must be invoked via IR); force bump test; bump test
reminder; multi-language LCD selection in English, French, German, Portuguese
and Spanish; alarm setpoint disable (set to zero for off); calibration due
date (1 to 365 days, or set to zero for off); confidence beep (every 10 seconds
when enabled); individual sensor enable/disable |
ALARM INDICATORS: |
Clearly advises alarm levels with visual, audible and vibrating alarms |
Visual alarms: |
Wide-angled flashing LED alarm bars
LCD indicates gas present and alarm levels encountered |
Audible alarm: |
95+ dB variable pulsed audible alarm at 11.81 in. / 30 cm |
Vibrator alarm: |
Pulses warning in gas alarm conditions, or for any status alarms |
Other: |
Low battery, over range, multiple gas and missing sensor |
ALARM LEVELS: |
Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases;
TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO;
OL (over limit alarm) |
LCD: |
Continuous, alphanumeric gas readout and status display advises: |
Gases monitored: |
H2S, CO |
Gas concentration: |
Simultaneous and continuous display of gas concentration(s) present
(in ppm, %LEL, or % v/v) |
STEL/TWA ppm: |
Records STEL and TWA exposures and displays on demand |
Peak ppm or %: |
Records and displays peak exposure to gas and displays on demand |
Alarm setpoints: |
Displayed on activation |
TESTS: |
|
Full function self-test: |
Full function self-test of sensor integrity, ciruitry, battery and
audible/visual alarms on activation |
Battery: |
Continuous |
GENERAL SPECIFICATIONS: |
Rugged, composite material with integral concussion-proof boot |
Operating temperature: |
-4 to 136°F / -20 to 58°C |
Temperature code: |
T4 |
Humidity: |
0 to 95% RH (non-condensing) |
EMI/RFI: |
Complies with EMC Directive 89/336/EEC |
Ingress Protection: |
IP66/67 (expected) |
Battery run-time: |
Up to 12 hours (typical) |
Size: |
4.2 x 2.4 x 1.1 in. / 10.7 x 6.0 x 2.7 cm |
Weight: |
5.6 oz. / 160 g |
EVENT LOGGING: |
Records and transmits up to 10 gas alarm events |
Event information: |
Gas type; peak exposure level (ppm or %); alarm duration in minutes and seconds;
time elapsed since the alarm occurred in days, hours and minutes; life remaining;
serial number; self-tests; cumulative alarm time |
DATALOGGER: |
User-downloadable datalogger |
Data recorder: |
All events and occurrences |
Sampling rate: |
Factory set at 15-second intervals |
Storage: |
16 hours; when full, the wraparound feature replaces
oldest data with most recent data |
Warranty: |
Full 2 year warranty including all sensors |
|
