Professional Equipment     Print Page
PO Box 5197
Janesville, WI 53547-5197

Phone Number: 608-743-8002
Fax Number: 608-743-8039
Toll Free Number: 1-800-334-9291
Toll Free Fax Number: 1-888-776-3187


RKI Air Quality Monitor Fixed System, Beacon 110 w/ Strobe Warning Light

 RKI Air Quality Monitor Fixed System, Beacon 110 w/ Strobe Warning Light
Item #: 135862
Manufacturer: RKI Instruments
Manufacturer Item #: 72-2110RK-02
Your Price: $1,090.00
You simply won't find a better value than the Beacon 110 Air Quality Monitor.

Features & Applications:

The Beacon 110 Air Quality Monitor Fixed System is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry’s best value single gas detection controller. The Beacon 110 Gas Detector can accept any RKI sensors or any 4-20 mA transmitter (2 or 3 wire, 24 VDC). The sensors can be mounted directly at the Beacon 110 housing, or can be wired remote from the controller.

The Beacon features a backlit digital display and is equipped with 10 amp rated relays that are capable of providing direct power to external alarms and horns. An external reset switch allows the alarm to be silenced from outside of the controller housing. The Beacon 110 is also housed in a NEMA 4X rated case for a weather tight seal. This case design complies with lock out / tag out standards and can be fully secured. The Beacon 110 Gas Detector ships complete with a wall mounting kit.

Features:

  • Low cost versatile solution
  • Compact, weatherproof, NEMA 4X enclosure
  • 115/220 VAC or 24 VDC operation
  • Long life sensors (2+ years typical)
  • Accepts RKI O2/H2S/CO direct connect sensors
  • Accepts any 4-20 mA transmitter
  • Audible alarm with reset button
  • Two programmable alarm levels
  • Built-in trouble alarm with relay
  • Relay rating 10 amps, form C
  • Provides 4-20 mA output

Applications:

  • Petrochemical plants
  • Refineries
  • Water & wastewater treatment pants
  • Pulp & paper mills
  • Gas, telephone, & electric utilities
  • Parking garages
  • Manufacturing facilities
  • Steel
  • Automotive
  • HVAC

Sensors not included!

Spec Summary:

Physical
Dimensions:
 Height: 8.5" 216 mm
Width 7.0" 178 mm
Depth 4.3" 109 mm
Enclosure:
 Wall mounting grey polycarbonate with hinged cover
Conduit:
 3/4" NPT conduit hubs, 2 provided
Connection:
 1 for sensor wiring
1 for power & relay wiring
Wiring
Termination:
 Screw type terminal block 14 gauge max
Power:
 Universal 115 VAC & 220 VAC, or 24 VDC nominal,
battery backup option available
Controls:
 3 internal push buttons for setup, programming, and
calibration. 1 external push button for alarm reset
Environmental
Operating Temp:
 14 to 122°F (-20 to 50°C)
Storage Temp:
 -4 to 158°F (-20 to 70°C)
Relative
Humidity:
 0 - 100% RH
Enclosure
Rating:
 NEMA-4X enclosure, waterproof, chemical, and
weather resistant
Inputs
Sensors:
 Oxygen
Carbon Monoxide
Hydrogen Sulfide
Remote amp not required for less than 500 feet
4-20 mA Sensors:
 Accepts any 4-20 mA transmitter (24 VDC, 2 or 3 wire).
A wide variety of RKI/Riken sensors are available with
4-20 mA signals. (See list of detectable gases.) Wiring
distances up to 5000 feet
Sampling Methods:
 Diffusion and sample draw heads available

Outputs
Relays:
 3 relays - 10 amp rating (at 115 VAC), SPDT isolated contacts.
2 relays for gas alarms and 1 trouble relay. Relays fully programmable
for: increasing or decreasing alarm, latching or self reset, normally
energized or normally de-energized, time delay for alarm on and alarm off
4-20 mA:
 Signal output, 4-20 mA (maximum load impedance 500 ohms), per channel
24 VDC:
 24 VDC (400 mA max) output provided to operate sample
drawing adapters or other accessories
Display:
 2 x 8 Alphanumeric display with backlighting
Audible:
 Built-in audible alarm, 94 dB, mounted on enclosure
Coded output: pulsing = gas alarm, steady = fail
Visual:
 3 LED’s on the front cover for alarm status indication, and malfunction
Warranty:
 One year materials and workmanship

Partial List Of Detectable Gases:

Ammonia (NH3)
 0 - 75.0 ppm
Arsine (AsH3 ) 0 - 0.20 ppm
Boron Trichloride (BCl3) 0 - 15.0 ppm
Carbon Dioxide (CO2) 0 - 1.0 %
Carbon Monoxide (CO) 0 - 300 ppm
Chlorine (Cl2) 0 - 3.0 ppm
Chlorine Dioxide (ClO2) 0 - 1.00 ppm
Chlorine Trifluoride (ClF3) 0 - 1.00 ppm
Diborane (B2H6) 0 - 30.0 ppm
Fluorine (F2) 0 - 6.0 ppm
Hydrogen (H2) 0 - 2000 ppm
Hydrogen Chloride (HCl) 0 - 15.0 ppm
Hydrogen Fluoride (HF) 0 - 9.0 ppm
Hydrogen Sulfide (H2S) 0 -100.0 ppm
Nitric Oxide (NO) 0 -100.0 ppm
Nitrogen Dioxide (NO2) 0 - 15.0 ppm
Nitrogen Trifluoride (NF3) 0 - 30.0 ppm
Oxygen (O2) 0 - 25.0 %
Ozone (O3) 0 - 1.0 ppm
Phosphine (PH3) 0 - 1.0 ppm
Silane (SiH4) 0 - 15.0 ppm
Sulfur Dioxide (SO2) 0 - 30.0 ppm
TEOS (Si(OC2H5)4) 0 -15/30 ppm
Close Window