This TPI Air Velocity Meter will make work easier for the HVAC professional!
Features & Applications:
Test Products International (TPI) are one of the world’s
leading designers and manufacturers of digital handheld test
equipment and instruments.
The TPI 575C1 is a combination Vane and Hotwire Air Velocity Meter for the HVAC professional. This easy to use instrument is state of the art and is used to provide temperature and air velocity readings. This meter is ideal for HVAC air flow measurement, air duct analysis, fume hoods, registers, exhaust grills and low flow applications.
Features:
- (Vane) Air flow 0.4 to 25 m/s (Also reads km/s, ft/min, knots/h, miles/h)
- (Hotwire ) Air flow 0.2 to 20 m/s (Also reads km/s, ft/min, knots/h, miles/h)
- Temperature -5° to 175° F (-20° to 80°C)
- Data record function for maximum and minimum temperature and air velocity reading
- Download to a computer using the RS-232 port
- 39” cable length with Lemo connector
- Data Hold
- Auto Power Off
- Protective boot and soft carrying case included
Applications:
- Air flow measurements in heating, ventilation and air conditioning systems
- Air duct analysis
- Fume hoods
- Flue Registers
- Exhaust grills
- Hotwire velocity meter enables user to read below 80fpm applications
(low flow)
Spec Summary:
Display: |
Dual digits LCD with function annunciation |
Measurement: |
m/s, km/s, ft/min, knots, mile/h, °F, °C |
Measurement Range and Accuracy:
Air Flow (Vane)
(Hotwire)
Temperature |
0.4 ~ 25 m/s (±2% of reading ±3 digits)
0.2 ~ 20 m/s (±5% of reading ±3 digits)
-5 ~ 175°F (±1% of reading ±1.0°F ±3 digit
-20 ~ 80°C (±1% of reading ±0.5°C ±3 digit |
Operating Temperature: |
32 ~ 122°F (0 ~ 50°C) |
Operating Humidity: |
Less than 80% R/H |
Powering: |
1.5V AAA x 6EA |
|
