Features & Applications:

The TPI Clamp-On AC/DC Digital Multimeter is an 11,000 count auto ranging meter with true RMS, frequency, capacitance, temperature, non-contact voltage detection, data hold, relative mode, Min/Max/Peak, peak hold and sleep mode/auto off. It has 0.5% basic DC accuracy.

Features:

• Measure motor in-rush current and run current
• Measure temperature differential with relative mode
• Non-contact voltage feature can be used to immediately see if power is being supplied to the 24VAC control circuit of thermostats
• Frequency, Min/Max/Record, Data Hold, and Peak Hold Up to 40,000 Microfarads to test run and start capacitors
• 4,000 count display with 41 segment analog bar graph
• Auto & Manual Ranging
• Low Battery Indicator
• Over Range Indication (“OL”)
• Hi Voltage Indicator(>30V AC/DC)
• Auto Power Off after 30 minutes
• Separate Battery/Fuse Compartment
• Low Ohm Range (400V)
• Amps AC Resolution: 0.01A
• VDC/VAC Resolution: 0.1mV
• DCµA measurement (0.01µA resolution)
• Temperature measurement with 0.1 ° resolution
• Overall Dimensions: 10” x 1.3” x 2.5” (255 x 32.5 x 65mm)
• 9 Volt Alkaline Battery, Test Lead Set, 0.5A / 600V Fuse, Soft Carrying Pouch

Applications:

• Measure flame safety control current
• Test run and start capacitors and motors
• Measure motor run current and capture peak motor start up amperage
• Measure heat anticipator current
• Determine thermocouple voltage
• Test line and control voltages
• Measure heating element resistance
• Measure air temperature in ducts
• Test for the presence of voltage in circuits without contacting the circuit
• Measure temperature differential using relative mode

Spec Summary: