AC/DC Voltage, continuity, polarity & microwave leakage detector flathead screwdriver
Features & Applications:
Use this sleek unit for quick and easy AC voltage testing for both contact and non-contact applications. Its unique, handy microwave leakage detection means you have one less instrument to carry - can also be used as a screwdriver.
Features:
- AC Voltage Test: Contact method: 70 to 250 VAC, Non-contact method:
70 to 600 VAC
- DC Voltage Test: Up to 250 VDC
- Polarity Test: 1.5V to 36 VDC
- Continuity check: 0 to 5 M ohms
- Microwave Leakage Detection: 35 mW CM²
- Temperature Range: 14 to 122°F (-10 to +50°C)
- Frequency Range: 50 to 500 Hz
Applications:
- Connection wiring check
- Ground check
- Capacitor
- Diode; Rectifier
- Transistor (NPN and PNP types)
- Ignition Check
- Bulb; relay coil; fuse; speaker
- Fault finding
- Locating broken wire
- Static radiation pick up (TV or monitor)
RADIATION CHECK:
Detects static radiation (t.v.) and checks for leakage (microwaves):
- Place a cup of water in the microwave
- Set the oven to 1 minute on high AND TURN on
- Move the tester slowly around the door and in front of door
- LED lights up where microwave leakage is detected
Spec Summary:
|
AC Voltage Test:
|
Contact method from 70 to 250VAC
Non-contact method from 70 to 600VAC |
|
DC Voltage Test:
|
Up to 250VDC |
|
Polarity Check:
|
1.5V to 36VDC |
|
Continuity Check:
|
0 to 5M ohms |
|
Microwave Leakage Detection:
|
5mW CM² |
|
Temperature Range:
|
14 to 122°F (-10 to +50°C) |
|
Frequency Range:
|
50 to 500Hz |
|
Battery Replacement:
|
Type: 1.5V x 2 Alkaline or silver type |
|
Battery Life:
|
Approximately 5 hrs of continuous operation |
|
