Regardless of whether you’re a do-it-yourselfer buying your very first set of cordless tools, or a seasoned pro looking to upgrade your tool arsenal, you’d be smart to consider this six-piece combo kit from DeWalt. This versatile set of heavy-duty cordless tools will handle virtually any drilling, screw driving, woodcutting, metal grinding, metal cutting, and tile-sawing job you’re likely to encounter. And all six tools are powered by DeWalt’s popular 18-volt XRP (eXtended Run-time Performance) nickel-cadmium batteries.

The kit includes a 1/2-inch hammer drill-drill/driver that’s actually three tools in one: 1) Set it in the hammer-drill mode to quickly bore holes through concrete, brick, stone and other masonry surfaces; it delivers up to 34,000 blows per minute of rock-blasting percussive force. 2) Switch to the drill mode for drilling and hole-sawing through all sorts of woods and metals; the tool’s three-speed transmission lets you choose the optimum drilling speed for the job. 3) Employ the drill’s 22-position slip clutch for precise screw driving; choosing the appropriate clutch setting will help prevent you from overdriving the screw and possibly damaging the work surface.

The other tools included are: 6-1/2-inch circular saw that can cut through 2-by lumber with the blade set at 90 or 45 degrees; reciprocating saw with a tool-free blade clamp for quick blade changes; a two-speed impact driver that delivers 1,170 inch-pounds of torque for driving virtually any size screw quickly and easily; cut-off tool that can be used to grind and cut various types of metal, steel and ceramic tile; and a flexible floodlight that has a bendable goose neck that permits hands-free operation.

The kit includes two 18-volt batteries, a one-hour charger and a convenient soft-sided carrying bag that’s roomy enough to fit all of the tools and several accessories.

Features:

• DC925 XRP™ 18V cordless hammerdrill with DEWALT built high power motor delivers 510 unit watts out for maximum performance in all drilling and fastening applications
• tightens throughout operation providing superior bit gripping torque
• DC390 XRP™ 18V circular saw with 6-1/2" carbide blade and rip fence can cut 2x4's at a 45° angle in a single pass
• DC385 XRP™ 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft
• DW056 18V impact driver with 1,170 in-lbs of maximum torque
• DC410 18V cut-off tool with 6,500 rpm provides high power for cutting and grinding applications
• DW919 18V flexible floodlight provides hands-free use
• Includes:
  • DC925 XRP™ 1/2" 18V hammerdrill/drill/driver
  • DC390 XRP™ 18V circular saw
  • DC385 XRP™ 18V reciprocating saw
  • DW056 18V impact driver
  • DC410 18V cut-off tool
  • DW919 18V flexible floodlight
  • 1 hour charger
  • (2) 18V XRP™ batteries
  • 360° side handle
  • Carbide tipped circular saw blade
  • Circular saw rip fence
  • Type 1 and type 27 guards
  • Wrench
  • Backing flange
  • (1) type 27 wheel
  • 3-position side handle
  • Contractor bag

Spec Summary: