This waterproof Bright Star Flashlight can be sumberged up to 100ft.!
Features & Applications:
The Bright Star Responder 2 C Flashlight features a polycarbonate with thermoplastic elastomer (TPE) lens. It is non-conductive and has a Xenon bulb with a prefocused spot beam. This flashlight is submersible to up to 100' and can withstand a 30' drop onto concrete.
Features:
- Polycarbonate with Thermoplastic Elastomer (TPE) lens
- Non-conductive
- Passes 30 foot drop onto concrete
- 30,000 candle power
- Submersible to 100ft
- Pushbutton switch
- Pre-focused spot beam
- Key ring
- Lifetime limited warranty
- Xenon bulb
- Ultem 1000 reflector
- Super-tough nylon tube
- Super-tough nylon belt clip
- Braided nylon lanyard
- Thermoplastic Elastomer (TPE) switch boot
- Safety approvals:
- ATEX II 2 G EEX ib e IIBT3
- CSA: Class I, Division 2 Group A, B, C & D
Class II, Division 2 Group G
Operating Temp T3A
- MSHA: Approved for use as mining equipment
Class I, Division 1, Group C & D
Operating Temp T3C (When used with
a KPR102, KPR104 or PR2 Bulb)
- UL: Class I, Division 1, Group D
Class I, Division 2 Group A, B, C & D
Class II Division 2 Group G
Operating Temp T3A
Spec Summary:
| Unit Dimensions: |
Length: 6.7"
|
| Power Source: |
2 C Cell
|
| Bulb/Lamp: |
Xenon
|
| Bulb/Lamp Life: |
15 hours |
| Light Output: |
30,000 Beam Candle Power |
| Replacement Bulb: |
XPR2C |
| Approximate Burn time at continuous use: |
5 hours 40 min. |
| Approximate Burn time at intermittent use: |
6 hours 30 min. |
|
