The Fluke 771 Milliamp Process Clamp Meter measures mA signals for PLC and control system analog I/O!
Features & Applications:
The Fluke 771 Milliamp Process Clamp Meter measures 4-20 mA signals without breaking the loop. The detachable clamp with extension cable allows you to take measurements in tight locations, and the built-in spot light illuminates hard to see wires in dark enclosures.
Features:
- Measure mA signals for PLC and control system analog I/O
- Measure 4 to 20 mA output signals from transmitters without breaking the loop
- Best in class 0.2 % accuracy
- Resolution and sensitivity to 0.01 mA
- Hold function captures and displays changing measurements
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight
Spec Summary:
Environmental Specifications: |
|
Diameter of measurable conductor: |
0.177” or 4.5 mm max |
Operating temperature: |
-10 to 55 ºC |
Storage Temperature: |
-25 to 70ºC |
Operating Humidity: |
< 95% @ <30 ºC, < 75% @ 30 to 55ºC |
Operating Altitude: |
0 to 2000 m |
IP Rating: |
IP 40 |
Size: |
2.32 x 1.5 x 8.35 in. (59 x 38 x 212 mm) |
Weight: |
9.1 oz. (260G) |
Vibration: |
Random 2 g, 5 to 500 Hz |
Shock: |
1 meter drop test (except the jaw) |
EMI/RFI: |
Meets EN61326-1 |
Temperature Coefficient: |
0.01% ºC |
Power, battery life: |
(2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical |
Warranty: |
Three years for electronics, 1 year for clamp cable assembly |
|
