The GasBadge Pro Sulfur Dioxide Single Gas Monitor features a loud audible alarm and ultra-bright LEDs!
Features & Applications:
This GasBadge Pro Sulfur Dioxide Single Gas Monitor is packed full of features and offers a lifetime of protection from hazardous gases. Equipped with "smart" sensor technology, the unit can instantly identify and monitor hazardous levels of Sulfur Dioxide and alert you via select low and high alarms with ultra-bright LED's.
This monitor features a concussion-proof overmold and is further protected by a durable, rugged outer shell that is water resistant, and protected from RF. With its four-button navigation, this device is user friendly to easily setup, operate, and calibrate all of its unique functions.
Compliance: UL and cUL Class I, Div. 1, Groups A, B, C, D; T4 approved. UL Class I, Zone 0, AEx ia IIC T4 approved. CSA Class I, Div. 1, Groups A, B, C, D; T4 approved.
Features:
- "Smart" technology
- Identifies Sulfur Dioxide
- Water resistant outer shell
- Concussion-proof mold
- Loud Audible Alarm
- Ultra-bright LEDs
- Minimum of 2,600 hrs of run time
- Logs last 15 alarms
- Ability to be viewed on a PC or printed with an infrared printer
Spec Summary:
| Case: |
Rugged, water-resistant polycarbonate shell with protective concussion-proof overmold. RFI resistant.
|
| Weight: |
3 oz. (85 grams) |
| Dimensions: |
3.2 x 1.9 x 1.1 in. (81.3 x 48.3 x 27.9 mm) |
| Measuring Range: |
Gas |
Symbol |
Range |
Increments |
| Sulfur Dioxide |
SO2 |
0-150 ppm |
0.1 ppm |
| Display: |
Custom LCD with graphical icons for easy use
Segmented display for direct gas readings
Backlight for low light conditions
"Go/no-go" display mode
Peak reading indication
|
| Alarms: |
User selectable low and high alarms
Ultra-bright LEDs, loud audible alarm (95 dB and vibrating alarm) |
| Battery/Runtime: |
User replaceable 3V, CR2 Lithium battery
2,600 hour runtime (minimum)
|
| Event-Logger: |
Continually on. Logs last 15 alarm events, stamping how long ago the event occurred, the duration of the event, and the peak reading seen during the event.
Event-logger can be viewed on PC or printed directly from the instrument to an infrared printer. |
| Temperature Range: |
-40ºC to 60ºC (-40ºF to 140ºF), typical |
| Humidity Range: |
0-99% RH (non-condensing), typical |
| IP Rating: |
Third-party certified IP66/67 (water resistant) |
| Approvals: |
UL and cUL:
- Class I, Div 1, Groups A, B, C, D; T4
- Class I, Zone 0, AEx ia IIC T4
CSA:
- Class I, Div 1, Groups A, B, C, D; T4
- Ex ia IIC T4
ATEX:
-Intrinsic Safety:Safety: EEx ia I/IIC T4
-Equipment group and Category: II 1G; I M2
-EMC: EN50270
Performance: O2 (EN50104); CO, H2S, (EN45544) (pending)
Australia: Ex ia I/IIC T4
IEC: Ex ia IIC T4
Russia: GOST-R Approval (pending)
MSHA: Intrinsically safe for methane/air mixtures only (pending) |
Note: Industrial Scientific products can only be sold in North America only.
|
