Zircon MultiScanner i700 OneStep

Zircon MultiScanner i700 OneStep doesn't look or work anything like your old stud finder!

Item #: Q511-7000 Manufacturer: Zircon Manufacturer Item #: I700 Product Type: Stud Sensor

	List Price:		$72.95

Features & Applications:

It all starts with a floating scanner head featuring a bright backlit LCD display. Press the Zircon MultiScanner i700 OneStep against the wall, and the floating head adjusts to your hand angle to make it easy to keep contact with the wall. Move it sideways across the wall, and when the i700 finds the center of a stud, it beeps and the SpotLite® shines. i700 locates wood and metal studs, finds nonferrous metal such as copper up to 1-1/2 inches deep, and finds ferrous metal, such as rebar, up to 3 inches deep. AC Wirewarning^® continuously detects hot AC for safety, and AC Trace helps map out subsurface location of hot electrical wiring.

Features:

• Zircon-exclusive CenterVision™ technology finds the center of studs in OneStep™
• Auto Depth Sensing automatically scans varying wall depths
• Auto Recalibration continuously recalibrates and points in the direction of the nearest stud
• Exclusive AC WireWarning™ continuously detects hot AC
• Integrated erasable marker for one-hand operation
• Unique floating head for improved accuracy
• Finds both wood and metal studs
• AC scanning to trace hot wires
• Metal scanning for finding pipes, nails, rebar, and other hidden metal
• Large easy-to-see backlit LCD screen
• Patented SpotLite® Pointing System
• Turn off wood and metal scan to look only for hot AC to find and trace wires, even in plastic conduit
• Uses a patented sensor to pinpoint the center and edges of wood or metal studs behind walls, floors, or ceilings
• Metal-only setting looks specifically for metal pipes or rebar
• Backlit LCD screen. Easy-to-understand, on-screen graphics
  and audio signal indicate target
• Exclusive, patented SpotLite® Pointing System shines a bright beam of light over target center

Applications:

• Find the center and edges of wood or metal studs or joists to:
  – Hang cabinets, pictures, mirrors, and shelves securely
  – Install ceiling fans, grab bars, and chandeliers
• Find metal pipes behind tile and in concrete
• Find conduit, rebar, electrical boxes, exhaust vents, and ducting
• Trace hot wires behind walls, floors, and ceilings

Spec Summary:

Dimensions:	7.6 in. H x 3.6 in. W x 1.7 in. D (193 mm x 91 mm x 43 mm)
Weight :	7.4 oz (210 g) with battery
Battery type:	9-V (included)
Position accuracy:	Stud Scan mode: Up to 3⁄4 inch depth Center: 1⁄8 inch typical Edge: 3⁄16 inch typical At 1 inch depth Center: 1⁄4 inch typical Center-finding capability: up to 1-1⁄2 inches typical Metal Scan mode: Typically within 1⁄2 in. (13 mm)
Depth:	Up to 1-1⁄2 in. (38 mm) in Stud Scan mode Up to 1-1⁄2 in. (38 mm) for copper in Metal Scan mode Up to 3 in. (76 mm) for rebar in Metal Scan mode NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, and paint.
AC Position accuracy:	In typical drywall with Romex™ wiring, wire can be detected up to 3 in. (76 mm) deep
AC Depth:	In typical drywall with Romex™ wiring, wire can be detected up to 2 in. (50 mm) deep NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
Operating temperature:	40 to 120°F (-4 to 49°C)
Storage temperature:	-14 to 140°F (-26 to 60°C)
Humidity:	80% RH (non-condensing)
Water resistance:	Splash resistant, not waterproof

Zircon MultiScanner i700 OneStep Manual

Click the link(s) above to open the document(s) for this item. Should you wish to download it, right click on the link and select "Save Target As..." or "Save Link As...".

If you do not have Acrobat Reader, click here to download the latest version.